How To Palm m100 series hard reset

Resetting your Palm m100 handheld

Under normal circumstances, you will not have to use the reset
button. On rare occasions, however, your handheld may no longer
respond to buttons or the screen. In this case, you need to perform a
reset to get your handheld running again.
Performing a soft reset
A soft reset tells your handheld to stop what it’s doing and start over
again. All records and entries stored in your handheld are retained
with a soft reset. After a soft reset, the Applications Launcher screen
appears.
To perform a soft reset:
n Use the tip of an unfolded paper clip (or similar object without a
sharp tip), to gently press the reset button inside the hole on the
back panel of your handheld.

Performing a Palm m100 hard reset

With a hard reset, all records and entries stored in your handheld are erased.
Never perform a hard reset unless a soft reset does not solve your problem.
Note: You can restore any data previously synchronized with your
computer during the next HotSync operation.

To perform a Palm m100 hard reset:

1. Hold down the power button on the front panel of your handheld.
2. While holding down the power button, use the reset tip tool, or the
tip of an unfolded paper clip (or similar object without a sharp tip)
to gently press and release the reset button.
3. Wait for the Palm™ logo to appear; then release the power button.
4. When a message appears on the handheld screen warning that you
are about to erase all the data stored on your handheld, do one of
the following:
Press the upper scroll button on the front panel of the handheld
to complete the hard reset and display the Digitizer screen.
Press any other button to perform a soft reset.

Note: With a hard reset, the current date and time are retained.
Formats Preferences and other settings are restored to their
factory default settings.