All Mtk Usb Flash Tool Usb Flash Guide

All
Mtk Usb Flash Tool
Usb Flash Guide
HOW TO FIND BOOT KEY

STEP 1
1. Run the Flash Tool,Select Download Agent and Scatter/Config File

STEP 2
Click "Option" to set the "Buadrate" to 921600

STEP 3
COM Port" same as GPG Dragon OR USB DOWNLOAD

STEP 4
READ FLASH
(NOTE: If the red Progress bar no going,you need Re-connect Box VCC and GND to Mobile bettery)
Click “Add” button . If the files added already, don’t do the “Add” step; click “Remove” to erase the surplus files.

STEP 5
Double click “ROM_O” to get its options,
then set the saving path and file name as Picture 5

STEP 6
5.Click “Save” button, and set the address range well. The setting must be correspond to Flash size, as 4M, 8M or 16M (click to check “How to verify”) and edited in the blanks, please do as Picture 5 and Picture 6.

4M Flash (first address-0x00000000-length-0x00400000.)
8M Flash (first address-0x00000000-length-0x00800000.)
16M Flash (first address-0x00000000-length-0x01000000.)
2M Flash (first address-0x00000000-length-0x00200000



STEP 8
Click “ROM”and choose the right flash file from your Computer,as Picture

STEP 9
Click "Download"Button,and hold the power key,if this time red Progress bar no going,you need Re-connect Box VCC and GND to Mobile bettery

STEP 10
HOW TO FORMAT
Click Format Button



HOW TO USE

1.make phone in bootloader
2.press and hold one button conect usb to pc
(try one by one button to make phone bootloader)
look at device manager > port( com & LPT)
when showing device com phone ready in bootloader
than set com device at flash tool

MTK FLASH TOOL:
http://www.mediafire.com/download.php?30lunsef3c6v6b5
MTK USB DRIVER:
MTKUSB_Driver.zip